Product ID:BOSS RTV SILICONE ADHESIVE SEALANT
MSDS Date:07/09/1990
FSC:8030
NIIN:00N024652
MSDS Number: BMGDS

ACCUMETRIC INC

350 RING ROAD
ELIZABETHTOWN, KY 42701
US

Emergency Phone: 502-769-3385

Info Phone: 502-769-3385

Cage: 58149

ACCUMETRIC INC

843 ELIZABETHTOWN, KY 42701 US

Telephone: 502-769-3385

Cage: 58149

POLYDIMETHYL SILOXANE;(POLYDIMETHYSILOXANE)

CAS: 9016-00-6

RTECS: TQ2690000

Fraction By Weight: 85%

SILICON DIOXIDE, AMORPHOUS; (SILICA)

CAS: 7631-86-9

Fraction By Weight: 9%

OSHA PEL 6 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

SILANE, METHYLTRIACETOXY-;(METHYLTRIACETOXYSILANE)

CAS: 4253-34-3

RTECS: VV4500000

Fraction By Weight: 2%

OSHA PEL 10 PPM

ACGIH TLV: 10 PPM

ETHYLTRIACETOXYSILANE

CAS: 17689-77-9

Fraction By Weight: 2%

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGEST:MAY CAUSE STOMACH DISCOMFORT.
SKIN: UNCURED PRODUCT MAY IRRITATE LIPS, GUMS, TONGUE, AND SKIN.
EYE:UNCURED PRODUCT CONTACT IRRITATES EYES.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE KNOWN.

First Aid:EYE:FLUSH WITH WATER FOR AT LEAST 15 MINUTES. GET MD.
SKIN:WIPE OFF AND FLUSH WITH WATER. INHAL:REMOVE TO FRESH AIR. GET
MD. INGEST:GET MD. INHAL:REMOVE TO FRESH AIR. SUPPORT BREATHING
(GIVE O2/ARTF R ESP) .

Flash Point Method:TOC
Flash Point:>212F,>100C
Extinguishing Media:WATER, WATER FOG, CO2, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN.

Spill Release Procedures:REMOVE PRODUCT AND USE ABSORBENT MATERIAL TO
TAKE CARE OF ANY OIL-LIKE RESIDUES.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE BELOW 90F. USE REASONABLE CARE
AND CAUTION.
Other Precautions:NONE KNOWN.

Respiratory Protection:NIOSH/MSHA APPROVED ACID GAS/ORGANIC VAPOR TYPE
RESPIRATOR.
Ventilation:NONE.
Protective Gloves:CHEMICAL WORKERS GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE.
Work Hygienic Practices:GROSS AMOUNTS OF MATERIAL SHOULD BE REMOVED
FROM SKIN AS SOON AS PRACTICAL, ESPECIALLY BEFORE EATING OR
SMOKING.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

HCC:N1
Vapor Pres:<5
Spec Gravity:1.04
Evaporation Rate & Reference:<1 (ETHER=1)
Solubility in Water:<0.1%
Appearance and Odor:ACETIC ACID-LIKE PASTE

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIAL CAN CAUSE A REACTION.
Stability Condition to Avoid:AIR OR MOISTURE CAUSES POLYMERIZATION AND
ACETIC ACID VAPORS ARE FORMED.
Hazardous Decomposition Products:SILICON DIOXIDE, CO2, TRACES OF
INCOMPLETELY BURNED CO PRODUCTS.

Waste Disposal Methods:REVIEW ALL LOCAL, STATE, AND FEDERAL REGULATIONS
CONCERNING HEALTH AND POLLUTION TO DETERMINE APPROVED DISPOSAL
METHOD.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.